Request Information Download PDF
GT-96180-1856-T3-AP GT-96180-1856-T3-AP
Level VI, DOE EPS 2.0/ErP2 compliant 18W Power over Ethernet (POE) Injector/IEEE802.3af PoE PSE (Power Sourcing Equipment), Gigabit, Class I
Information
Model NumberGT-96180-1856-T3-AP
DescriptionGT-96180-1856-T3-AP, ITE Power Supply, Desktop/External, Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE), , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 18 Watts, 56V in 0.1V increments, Approvals: Level VI ETL S-Mark CB WEEE VCCI RoHS 2 PSE China RoHS CE CB
Agency Documentshttp://www.globtek.info/certs/GT-96180-TZ/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000Mj4cSEAR
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000Mj4cSEAR
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologySingle Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE)
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.5A
Wattage (W)18
Vout Range (V)56
EfficiencyVI
Ingress Protection
Size (mm)
Enclosure




     User-added image




 
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GT-96180-1854-T3-AP540.3317.82RFQ
GT-96180-1856-T3-AP560.32117.98RFQ
SpecificationsGlobTek’s GT-96180-18VV Power over Ethernet Midspan offers cost effective and reliable solution for remote powering of Wireless LAN Access Points, Voice over IP phones, Security Cameras, RFID readers and other IP terminals up to 18 Watts over existing network infrastructure. GlobTek PoE Midspan can be configured to 18watts of power per port over two pairs in compliance with IEEE 802.3af standard. When the load device is connected, GlobTek’s PoE Midspan will initiate automatic detection process and only those terminals that are found valid will be powered. GlobTek’s PoE Midspan is designed to
function with and provide power to any IEEE 802.3af compliant PoE devices.

MAIN FEATURES
- Withstands high energy EMI Immunity events without going into latched shutdown state

- Midspan can be configured to 18W per port for IEEE 802.3af compliance
- IEEE 802.3af Detection, Disconnect and Overload Protection
- LED User Interface for Power Good and Fault Conditions
- Designed to meet 10/100/1000 BaseT Data Rates
- Universal Input Power from 100Vac to 240Vac
- Green Design: Compliant to DoE efficiency level VI requirement.
- Full Protection for Over Voltage and Current
- Compact 104 x 54 x 40 mm (w/o MTG Flange)

APPLICATIONS
- VoIP Phones
- VoIP Phone with Video
- Wireless Access Points
- Bluetooth Access Points
- Multi-Band Wireless Access Points
- Network Security Cameras
- Point of Sales
- Industrial Controllers
- Electronic Time Card Readers
- Building Security Systems
- Network Camera with Pan, Tilt and Zoom Features
- Electronic Signs
- RFID Readers
- Motion Sensors
- HVAC Controllers
- Magnetic Card Readers
- PDAs
- Digital Time clock



A) ELECTRICAL SPECIFICATIONS:
INPUT
Input Range: 90-264 Vac (85-264Vac @ 85% of rated output power)
Input Line Frequency: 47-63Hz
Input Current:< 0.5A RMS @ 90Vac Full Load
Inrush Current: 60A Typical, Cold Start @ 25°C at 230Vac
No load power < 100mW
Efficiency: >85%, 4 Point Avg Efficiency
Turn on-delay: 1 Second Typical @ 115Vac
Input Line Protection: MOV Transient protected.
Hold-up Time: 8ms Typical at nominal input voltage and full load
Leakage current: <100uA
Isolation: 3000VAC


OUTPUT
Number of Ports: One

Data Rates: Designed to Meet 10/100/1000 Mbits/second Ethernet Speed

Power Injection Method: For IEEE 802.3af Midspan, 4&5 for V+ and 7&8 for Common

Port Voltage: For IEEE 802.3af Midspan;
56Vdc Nominal at pins 4&5 to 7&8

Port Current: For IEEE 802.3af Midpsan;
0 to 320mA maximum for pins 4&5 to 7&8

Port Power: For IEEE 802.3af Midspan; 18W at pins 4&5 to 7&8

Port Voltage Regulation: Meets IEEE 802.3af Requirements

Port Voltage Ripple: Meets IEEE 802.3af Requirements

Port Voltage Transient Performance: Meets IEEE 802.3af Requirements

Port Overload Protection: Meets IEEE 802.3af Requirements. Port will shutdown during
overload and auto recover when overload is removed.

Port Short Circuit Protection: Meets IEEE 802.3af Requirements. Port will shutdown during
short circuit and auto recover when short is removed.
Port Power Disconnection Method: DC Disconnect. 10mA minimum load required to maintain Vport


User Interface: Green LED for Vport Valid, Flashes when Fault is detected

ENVIRONMENTAL
Temperature: Operating, -10C to 40C
Storage, -30C to 80C
Humidity: 0% to 95% Relative Humidity, Non-Condensing
Altitude: Operating, Up to 5000 m

MECHANICALS
Dimensions: 104*54*40 mm (w/o MTG Flange)
Weight: 0.35 Lb, 155 gr.
AC Input Connector: IEC 320 Inlet, C14, C8, C6 or C18 Style
Data and Data+Power Connector: Fully Shielded RJ45


D) EMISSIONS and IMMUNITY
Emission: Meets FCC Class B Part 15, EN55022 Class B
Immunity: Meets the following;

EN610000-6-2 (Industrial Level Immunity Compliance, extended levels shown in parenthesis)
EN 61000-4-2 ESD (+/-18KV Air, +/-8KV Contact, criteria A) (+/-20KV Air, +/-10KV Contact, criteria B)
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT (+/-2.5KV, criteria A) (+/-4KV, criteria B)
EN 61000-4-5 Surge   (+/-2KV Line-Line, +/-4KV Line to Gnd, criteria A)
EN 61000-4-6 Conducted Susceptibility
EN 61000-4-11 Voltage Dips and Interrupts
EN 61000-3-2 Harmonics, Class A
 
SAFETY APPROVALS

Compliant Standards: See listings at end of this drawing for specifics

IEEE 802.3af: Unit Tested per the requirements of IEEE 802.3af

INTEROPERABILITY: Unit's interoperability performance verified with various third
party PoE enabled systems. See table below.

 
SPECIAL OPTIONS
1. Custom Markings
2. High Rel PCB laminate with Plated through Holes for IPC610 Class 2 Compliance
3. Special Housing Colors



User-added image
Derating CurveUser-added image
Qty (ea.)/Carton48
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)410 x 450 x 195
Gross Weight (kg)
Label Width (mm)40
Label Height (mm)80
Input Configuration
DescriptionIEC 60320/C14 AC Inlet Connector, Class I, Earth GroundUser-added image
Mates with IEC 60320/C13 Plug

Optional Locking IEC60320 Receptable and cord option available on some models by request.:
User-added image

Standard International IEC 320/C13 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

 

Stock Power Supply Cords

Part Number/ Link

Country

Plug

Termination

Length (mm)

(Ft)

3 Conductors (Grounded) IEC 320/C13

3021457F701(R)

N. American

NEMA 5-15P

IEC 320/C13

2150

7

1191068F0701(R)

N. American

NEMA 5-15P Hospital

IEC 320/C13

2459

8

2194272M5701-T(R)

Argentina

IRAM 2073

IEC 320/C13

2500

8

5502022M5701A(R)

Australian

AS3112 / 3 PRONG

IEC 320/C13

2500

8

204B4272M5701(R)

Brazil

BRAZILIAN; WS-002

IEC 320/C13

2500

8

6023602M5701(R)

China

CCC GR2099

IEC 320/C13

2500

8

G8014272M5701(R)

Danish

AFSNIT SECTION 107-2-D1

IEC 320/C13

2500

8

23144272M5701-T(R)

Europe

CEE 7/7

IEC 320/C13

2500

8

20842710M701(R)

India

India IS 1293 (also known as IA16A3 or BS546)

IEC 320/C13

2500

8

377C4272M5701(R)

Israel

ISL 377C

IEC 320/C13

2500

8

23024272M5701(R)

Italy

CEI 23-16/VII

IEC 320/C13

2500

8

3003068F2701-HK(R)

Japan

JIS 8303 / 3 PINS

IEC 320/C13

2500

8

2313K3432M5701(R)

Korea

KS C 8305

IEC 320/C13

2500

8

23144272M5701-T(R) [Same as Europe Above]

Russia

GOST 7396

IEC 320/C13

2500

8

2084272M5701(R)

S. Africa

S. African

IEC 320/C13

2500

8

23214272M5701(R)

Switzerland

SEV 1011 ( EL 203)

IEC 320/C13

2500

8

3003322M5701(R)

Taiwan

BSMI

IEC 320/C13

2500

8

PZ0800100-2M5BK13H(R

UK

BS 1363A

IEC 320/C13

2500

8

7055002M5701A(R)

International

IEC 320 C14-C13

IEC 320/C13

2500

8

Approvals
LogoDescription

No Logo Applicable

IEC 60601-1:2005 (Third Edition) + CORR. 1 (2006) + CORR. 2 (2007) + AM1 (2012) or IEC 60601-1 (2012 reprint) (Ed 3.1)

No Logo Applicable

IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
User-added image  CE Certification
User-added imageInformation Technology Equipment Safety Part 1: General Requirements (UL 60950-1 Issued: 2007/03/27, Ed: 2 Rev: 2014/10/14) Information Technology Equipment Safety Part 1: General Requirements (CSA C22.2 No. 60950-1 Issued: 2007/03/27 Ed: 2 (R2012) Amd.
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
Protective Earth (ground)
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314327, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image
 
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+A2:2013 (http://www.intertek.com/marks/s/)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
228976540.33None
397439560.32None
258827560.32None

Poproś o więcej informacji